| Type | RM-2000 | |
| Output | According to bottle type | 2000PCS/H |
| Product specification | Bottle diameter | 20mm-100mm |
| Bottle height | 50mm-350mm | |
| Bottle mouth diameter | 15mm-38mm | |
| Mold | Cavities | 2cavities |
| Mold thickness | 200mm | |
| Mold effective area | 500*500mm | |
| Main power | Power | 380v 3Phase /220v 3Phase 50/60HZ |
| Install power/actual power | 49kw/10kw | |
| Air source | Low pressure air compressor | 1.2m3/min 1.0MPa |
| High pressure air compressor | 2.0m3/min 3.0MPa | |
| Cold dry machine | 2.0m3/min 3.0MPa 1set | |
| cooling water | Cooling water quantity | 15L/min |
| Main machine size | Length width height/weight | 2308*2058*1920mm/3600kg |
| Feed embryo machine size | Length width height/weight | 2000*950*2480mm/250kg |
| Character |
| A .This type bottle molding machine adopts advanced microcomputer control system, stable performance, the conveyor automatically send embryo; B .The bottle molding machine uses infrared heating lamps, penetrating power strong, embryo heated while rotation, orbital revolution, heating uniformity, rapid and reliable; C.Light tube in heating area, reflector width and height can be adjusted to suit the different structure preform heating, and automatic exhaust temperature device in order to ensure constant temperature of the drying tunnel; D.The bottle molding machine has a safety self-locking device, when a processes have problem, the program will automatically switch to a safe state; E.All the action drive by the cylinder,do not use pumps,with no pollution, low noise; F.Gas way design divide action and air blowing into three parts, action to meet the needs of the different pressure of the blowing, action; G.Cooling system to achieve the desired cooling effect; H.The bottle scrap rate less than 0.2%. |
